Chevrolet PERFORMANCE Crate Engine [360 HP | 380 TQ] (GM L96)

HEAVY-DUTY LS POWER FOR YOUR TRUCK!

Chevrolet Performance's L96 6.0L crate engine is based on the same work-ready powerhouse offered in Silverado HD trucks - and it's ready to go to work for you in a late-model truck or project vehicle that needs a fresh engine or a dual-purpose vintage truck built for work and fun.

Thanks to the advantage of its high-flow cylinder heads and other technologies, the L96 offers more than 50-percent more horsepower than the 454 Big-Block offered in Chevy trucks from the 1970s through the early 1990s. It delivers more torque, too, than most production 454 engines, while cranking it out it in a lighter, more compact package.

Chevrolet Performance's inclusive crate engine kit includes the engine assembly with a production high torque intake manifold, throttle body assembly, ignition coils, water pump, balancer and more. You'll need to add a front end accessory drive system and an engine controller, but we've got that covered, too.

Use accessory drive kit P/N 19369108 for applications without air conditioning and air conditioning add-on kit P/N 19260892 with AC. You'll also want engine controller kit P/N 19356410 to get it all running.

The L96 offers classic Big-Block grunt with all the modern advantages of an LS engine. Talk about the best of both worlds!

ENGINE TECH SPECS

• Part Number: 12677741
• Engine Type: Gen-IV Small-Block V-8
• Displacement (cu. in.): 364 cu. in. (6.0L)
• Bore x Stroke (in.): 4.000 x 3.622 (101.6 x 92mm)
• Block (P/N 12609999): Cast-iron with 6-bolt, cross-bolted main caps
• Crankshaft (P/N 12588613): Nodular iron
• Connecting Rods (P/N 12649190): Powdered metal
• Pistons (P/N 12589804): Hypereutectic aluminum (with polymer coating) with floating wrist pins
• Camshaft Type (P/N 12626660): Hydraulic roller
• Camshaft Duration (@0.50 in.): 193° intake / 200° exhaust
• Cylinder Heads (P/N 12629062): Aluminum
• Valve Size (in.): 2.000 intake / 1.550 exhaust
• Compression Ratio: 9.6:1
• Rocker Arms (P/N 12669995 int): Investment cast, roller trunnion
• Rocker Arms (P/N 12681275 exh): Investment cast, roller trunnion
• Rocker Arm Ratio: 1.7:1
• Recommended Fuel: Regular unleaded
• Maximum Recommended rpm: 6,000
• Reluctor Wheel: 58X
• Balanced: Internal

INSTALLATION NOTES

• Assembly does not include electronics
• Includes electronic throttle body
• Use L96 engine controller, P/N 19356410 for engine operation. Includes electronic throttle pedal required for throttle input to the ECU
• Not intended for marine use