Eibach PRO-SPACER Wheel Spacers [20MM], Black (2021-2023 Ford Mustang Mach-E)

Widen Your Stance
Eibach PRO-SPACER is the ideal combination for use with Eibach PRO-KIT or SPORTLINE, ensuring your wheels sit flush with the wheel arches and don't rub against the suspension or body work. Wheel spacers can also improve handling, stability, and traction by providing a more stable and even weight distribution between the wheels.

• Made from high tensile strength alloy
• Exact fitment using minimal production tolerances, resulting in exceptional wheel balance
• All applications tested in rigid durability and fatigue tests
• High grade corrosion protection through a special coating process (salt spray test according to DIN 50021)

Slip-On Systems: 1, 2, 3, 5, 6
Slip-on spacer systems range from 3mm - 25mm and require extended hardware for proper installation and simply slip on the hub. This hardware can be extended wheel bolts or extended wheel studs which require press-fitment into the wheel hub. Hardware is sold separately.

Bolt-On Systems: 4, 7, 8
Bolt-on spacer systems range from 15mm - 45mm and include fixed wheel studs or threads to allow use of original hardware and simply bolt to the hub. Bolt-on systems require the use of alloy wheels with pockets or cut-outs on the back-pad of the wheel in order for the wheel to sit flush on the spacer without interference of the original hardware. Required hardware is included.

Measuring for Proper Fitment
Place a straight edge against the point of least clearance on the outside of the fender. This point is where the tire is most likely to contact the fender. Typically, this will be the middle of the fender arch.

With a tape measure or ruler, measure from outermost part of the wheel/tire to the straight edge.
This number in mm will be the exact number to get the wheel/tire in line with the fender. We recommend choosing a spacer that is slightly less than the final number to avoid fender to tire contact.

2021-2023 Ford Mustang Mach-E Select, Route 1, Premium AWD | Extended Range, X
2021-2023 Ford Mustang Mach-E GT AWD | Excludes vehicles w/ MagneRide Damping System

20mm Spacer / Bolt Pattern 5x108 / Hub Center 63.3 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

We do not guarantee fitment, height or warranties on unlisted applications.