Meziere 300 Series Electric Water Pump, Blue (GM LS1)

The high flow electric water pump for the LS-1 and LS-6 engines is here. Track, dyno, and most importantly, street testing, has proved engines run cooler at low speeds and gain high end horsepower when running Meziere's bolt on LS1/LS6 pump. In addition to the released power, you get to keep all of your factory accessories. Taking quality to the extreme, the WP319 features a dual bearing belt idler, billet parts throughout, and a “weather-tite” electrical connection. The pump is backed by a two-year warranty. If you own GM’s hottest cars, you need Meziere’s newest, coolest pump.

Features:

• Purpose built for street use – 3000+ hour life expectancy.
• Fully polished or anodized in your choice of 4 colors (Black,Blue,Red,Natural).
• Chrome upgrade available.
• 55 GPM free flowing rating.
• All stainless steel hardware included.
• Heater and bypass provisions.
• Light weight. Complete standard LS-1 unit weighs only 14.9 pounds!
• Stainless steel large diameter main shaft with high performance ceramic seal.
• Inlet fitting supplied to match stock configuration.
• Easy install - truly a "bolt-on" pump.
• Full two year warranty - the best in the business!

Finishing The System:
This pump is supplied complete with gaskets and hardware, complete and ready to bolt on. The only additional item you will need is a standard Chevrolet thermostat if you desire to use one. It will install behind the exit fitting located above the idler pulley.

Amperage draw:
Under normal use the pump will draw 11-12 amps.

Overall Height Dimension:
The standard pump is 7.88" long from the mounting surface to the tip of the pump.

Pump Weight:
This application weighs 14.9 lbs.

16 volt systems:
When purchasing a pump for a 16 volt system we recommend the 16 volt optional motor on our pump. The 12 volt pump will work for limited use applications.