AFE CONTROL Sway Bar Set, 1.5" Front & 1" Rear (2006-2023 Dodge Challenger & Charger 5.7L, 6.1L HEMI, 6.4L 392 & 6.2L HELLCAT)

DETAILS
CNC Bent, Tubular Sway Bars
Ø38mm (1.5") Front Sway Bar, 2-Way Adj.
1134 lbs/in (35% Stiffer than Stock)
1325 lbs/in (58% Stiffer than Stock)
Ø25.4mm (1") Rear Sway Bar, 3-Way Adj.
154 lbs/in (133% Stiffer than Stock)
168 lbs/in (155% Stiffer than Stock)
186 lbs/in (182% Stiffer than Stock)
6061 T6 Aluminum Heavy Duty R. Bushing Brackets
90A Durometer Polyurethane Bushings
Durable Blue Powder Coat
Direct Fit Installation Requires No Modifications
Proudly Made in the USA

Dramatically improve your Mopar's handling with aFe CONTROL's sway bar set. With our fully adjustable sway bars, you can easily fine tune the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response will improve initial turn-in making the car more agile and feel lighter.

Whether its stability on the track, more rotation on the autocross, or just adding confidence in the canyon, aFe CONTROL sway bars will deliver.

CNC Bent Sway Bars:
Every aFe CONTROL sway bar is CAD designed and CNC bent to strict tolerances. This insures precise fit and perfect operation.

Adjustable Rates:
Our sway bars are 2-way/3-way adjustable, which allows the driver to dial in the front and rear roll resistance to achieve the desired handling bias.

Precision Sway Bar Ends:
Front sway bar utilizes CNC machined ends, while the rear is equipped with laser cut ends. These are welded to the bar in a special fixture to insure accurate hole positioning and consistent manufacturing.

Polyurethane Bushings and Billet Brackets:
aFe Control includes low-deflection polyurethane bushings and premium 6061-T6 aluminum black anodized billet brackets. Front polyurethane bushings are designed to fit with the factory mounting hardware. Rear brackets are equipped with grease fittings for easy maintenance.

EMISSIONS DISCLAIMER
This product does not require a CARB EO#.