ROCK JOCK CURRECTLYNC Steering System (Jeep Wrangler JK & JKU)

Have you seen the size of your JK's stock steering? Being pro-active, so you don't get stranded in the wilderness with bent or broken factory steering components, is the smart thing to do for your family's safety. RockJock's Currectlync Steering System for your JK Wrangler or Unlimited is must-have for those who get their vehicles out in the dirt!

RockJock's completely bolt-on Currectlync Steering System features an alloy steel 42mm (1.65 in.) diameter tie rod, a solid forged steel, organically shaped, high articulation drag link, larger forged, greaseable rod ends, premium jam nuts and adjusters and it's painted black, so it's ready for install right out of the box!

The new drag link's organic shape ensures maximum up travel where your steering components are concerned. With this piece installed, you should also consider our RJ-9120FJKF organically shaped forged Trac Bar and our RJ-107101-101 adjustable front bump stop kit so that you can fine tune your vehicle to truly achieve maximum up travel out of your build.

Our heavy duty U-bolt style steering stabilizer shock mounting bracket kit is included to allow you to easily reinstall your factory stabilizer shock or an upgraded CE-9170SD1 Rancho RS5000 stabilizer shock.

Both the tie rod and drag link feature double adjusters so that they do not require removal from the vehicle for adjustment once installed. This unit is designed for use on stock height or lifted vehicles, but for those with big tires, these components are also compatible with ram assist steering. This easy to install kit requires no modifications or machining to any part of the vehicle!

Kit Fits:

• JK Wrangler Unlimited (4-door) - All Models (with stock front differential)
• JK Wrangler (2-door) - All Models (with stock front differential)

Kit Includes:

• 42mm (1.65 in.) Alloy Steel Tie Rod Assembly (w/ Ends)
• Forged, Organically Shaped Drag Link Assembly (w/ Ends)
• Steering Stabilizer Shock Bracket Kit
• All required hardware and step-by-step instructions

Kit Features:

• Heavy duty greasable rod ends for increased strength and long service life
• Double adjusters on both rods simplifies alignment (eliminates the need to remove rod ends, stabilizer shock or ram components to adjust tie rod)
• Compatible with ram assist steering
• 2-year warranty

Fitment Specs.:

• Designed for stock height or up to 6 in. lifted vehicles
• Compatible with any OEM JK wheel
• Works with any size tire
• For use on any factory JK Dana 30 and Dana 44 differentials
• Can be used on aftermarket Dana 44 differentials that retain the factory outer steering knuckles, or aftermarket knuckles that retain the stock JK taper in the rod end mounting holes
• All 4 rod end tapers are designed to fit the vehicles stock, original taper for ease of installation. If your tapers have been enlarged or drilled out - this will no longer be a bolt-on kit

Notes:

• In stock knuckle applications, no increase in bump stop is required for the sake of the Drag Link.
• Do not use this unit outboard of the lift amount requirements outlined above! Deviating from these parameters will cause damage and premature wear to the components!
• The Steering Stabilizer Bracket Kit that is included may be used with the stock stabilizer shock, an upgraded CE-9170SD1 Rancho RS5000 stabilizer shock and likely many other aftermarket shocks.
• You must grease all rod ends via their zerk fittings before use. Grease unit with non-synthetic, hi-moly lube grease, such as our CE-9013G.

Component Specs.:

• Tie Rod = 42mm (1.654 in.) dia. alloy steel tube with indexed ends for maximum strength
• Tie Rod Ends = 1 1/8 in.-18 RH threads (on both), forged steel
• Drag Link = Organically shaped, solid forged steel
• Drag Link Ends = 1 1/8 in.-18 RH/LH threads, forged steel
• Drag Link Adjuster Sleeve = 5.080 in. Long x 1 1/8 in.-18 RH/LH threads, forged steel
• Steering Stabilizer Shock Bracket Plate = 1/4 in. laser cut steel
• Steering Stabilizer Shock Bracket U-Bolts = 3/8 in.-24 thread

Parts List:

• Tie Rod Assembly (complete): JK-9704TR
• Drag Link Assembly (complete): JK-9704DL-T
• Steering Stabilizer Shock Bracket Kit: JK-9703SB
• Tie Rod End (driver’s side): JK-9704TR-1
• Tie Rod Tube (only): JK-9704TR-3
• Tie Rod End (passenger’s side): JK-9704TR-2
• Tie Rod Double Adjuster: JK-9704TR-4
• Tie Rod Adjuster Clamp: JK-9704TR-5
• Tie Rod Jam Nut: JK-9704TR-6
• Drag Link End (at Pitman Arm): JK-9704DL-1
• Drag Link Threaded Adjuster: JK-9704DL-3
• Drag Link End (long, at knuckle): JK-9704DL-2
• Drag Link Adjuster Clamp: CE-9704DL-4
• Rod End Boot (fits all 4 points): JK-9703DLB
• Rod End Nut (fits all 4 points): JK-9704NUT
• Rod End Cotter Pin (fits all 4 points): CE-98338A190