radium ENGINEERING Dual Port Injection Kit, Coated (SUBARU EJ)

THIS IS A RACE ONLY PRODUCT MANUFACTURED AND SOLD FOR INSTALLATION ON VEHICLES DESIGNED TO BE USED SOLELY FOR COMPETITION PURPOSES. ONCE THIS PART IS INSTALLED, THE VEHICLE MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, ON A PUBLIC ROAD OR HIGHWAY. IF YOU INSTALL THIS PART ON YOUR VEHICLE AND USE THE VEHICLE ON A PUBLIC ROAD OR HIGHWAY, YOU WILL VIOLATE THE CLEAN AIR ACT AND MAY BE SUBJECT TO PERSONAL CIVIL OR CRIMINAL LIABILITY, INCLUDING FINES OF UP TO $4,819 PER DAY.

IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.

THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES; HOWEVER, CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.

VEHICLE COMPATIBILITY
02-14 Subaru Impreza WRX
07-22 Subaru Impreza STi
06-13 Subaru Forester XT
07-12 Subaru Legacy GT
07-12 Subaru Outback XT
05-06 Saab 9-2X Aero
04-06 Subaru Impreza STi - top feed fuel rails and injectors required
05-06 Subaru Legacy GT - top feed fuel rails and injectors required
04-05 Subaru Forester XT - top feed fuel rails and injectors required
04-05 Subaru Outback XT - top feed fuel rails and injectors required

This kit is for Subaru EJ race engines that cannot be used on public roads. ECU tuning is required.

Dual port injection (2 per runner) make this kit a good match for high power engines using alternative fuels. They can also be used in a standard single injector configuration as well. HOWEVER, A STANDARD FUEL RAIL, SUCH AS 20-0567-02 OR 20-0577-02, MUST BE PURCHASED SEPARATELY.

FUEL RAIL HOUSINGS
These were designed in-house and utilize die-cast manufacturing to achieve shapes and features not possible with other manufacturing methods. The inner bores are perfectly smooth without machining marks.

The outer mounting bosses on the fuel rail housings are designed to provide additional clearance for larger turbo inlet pipes.

The eccentric threaded blocks make this kit compatible with a wide variety of Subaru EJ intake manifolds.

FUEL RAILS
The fuel rails are CNC machined from solid 6061 aluminum, black anodized, and laser engraved for a high quality surface finish. They are compatible with all fuel types including alcohol mixtures such as E85 and is a necessary modification for those using methanol on high powered engines. The end ports are manufactured with large high flowing 10AN ORB end ports. The top auxiliary ports are threaded with 8AN ORB for ancillary accessories.

Press-fit spacers are included to thermally insulate heat transfer into the fuel rails. OEM top feed fuel rails are also compatible, including Radium Engineering 20-0567-02 OR 20-0577-02. HOWEVER, THESE ARE NOT INCLUDED AND MUST BE PURCHASED SEPARATELY. NOTE: Fuel rails that convert from side feed to top feed injectors are NOT compatible.

If additional fuel injectors (8 total) are required, the preinstalled 2AN ORB plugs can simply be unscrewed from the upper injector ports and can be used.

FUEL INJECTOR FITMENT

Each fuel rail has 4 injector ports that are machined to permit injectors with 14mm O-rings.

Primary Lower Fuel Injectors
Using the provided adapters, both OEM Subaru or 60mm Bosch EV14 style fuel injectors can be used. To reuse the OEM Subaru injectors, the provided top hat must be installed over the upper OEM injector O-ring.

To use aftermarket 60mm Bosch EV14 injectors as shown below, the provided injector seat must be installed over the lower injector O-ring.

Secondary Upper Fuel Injectors
Only 34mm Bosch EV14 style fuel injectors can be used. If the upper and lower billet caps are pulled off, the base injector is a 34mm Bosch EV14 which can be used.

Deatschwerks 16U-00-0042-4
Deatschwerks 16U-00-0050-4
Deatschwerks 16U-00-0065-4
Deatschwerks 16U-00-0090-4
Deatschwerks 16M-00-1500-4
Deatschwerks 16M-00-2200-4

20-0689-00 DUAL PORT INJECTION KIT, SUBARU EJ, COATED
These fuel rail housings utilize a Cerakote black coating originally formulated in Oregon, USA for the firearms industry. Cerakote is a state-of-the-art polymer-ceramic composite coating. It is only 0.001" thick and exceeds powder coat with resistance to abrasion, wear, chemical, and corrosion and is superior in impact strength and hardness.

INCLUDED
-Aluminum Fuel Rail Housings (x2)
-Black Laser Etched Aluminum Fuel Rails (x2)
-Injector Seats for Aftermarket Injectors (x4)
-Injector Hats with Filter Screens for OEM Injectors (x4)
-Insulating Press-In Spacers (x4)
-Aluminum Eccentric Manifold Blocks (x2)
-Dual Port Injection 2AN ORB Plugs (x4)
-Cylinder Head Gaskets (x2)
-Flanged JIS Hex Head Bolts (x4)
-Stainless Steel Hardware
-FKM O-ring Seals