A&A Corvette High Capacity Fuel System, Single Pump (1997-1998 Corvette)

The A&A fuel system works in tandem with the stock fuel system. Under normal driving conditions, the stock pump fuels the engine while the Bosch 455 pump remains on standby. This alleviates the problem of overheating the fuel that plagues most external fuel pumps. Our pump is turned on via an adjustable boost pressure switch. Our system provides a new stainless braided feed line that “T”s in to the factory fuel line at the fuel rail. Under boost, the factory pump continues to run and the A&A pump is also activated to provide enough fuel for even the most radical setups. No overheating or noise issues to contend with, as the pump only runs under boost conditions. A Boost A Pump can be added to the A&A system to up the fuel volume even more. Our system also converts the late model returnless systems to a full return system. A return line is run from the factory fuel rail to a billet, adjustable fuel pressure regulator mounted on a stainless steel bracket. The return line runs from the regulator to the factory return line on 97-98 models, back to the factory line aft of the fuel filter on 99- early 03 cars and all the way back to the tank on late 03- present models. This system, in various configurations, will satisfy the thirstiest of C5 and C6 engines. It is the simplest and most effective fuel system available for forced induction applications over 550 RWHP. The system is very eye appealing with its braided stainless steel lines and bracket, anodized “AN” fittings, and anodized Russell quick disconnects. The factory fuel rail covers will fit right over our system. The lines all come pre assembled as does the regulator and pump assembly. Easy to follow instructions with pictures are also supplied with the system. The A&A fuel system is THE solution for your forced induction fueling needs.