This kit is designed for those that already have their own supercharger
head unit and bracket but want the latest in intercooler and overall
system design. (Works with most brands of superchargers)
- Our custom sheet metal enclosure supports the front fascia and
captures air from the radiator cavity, forcing it through the radiator
and intercooler instead of allowing it to escape.
- The upgrade kit also includes our Ram Air intercooler. This
intercooler is the most efficient intercooler on the market for the C5
Corvette. At 25” wide, with its integral "Ram Air" scoop, the
intercooler rams massive amounts of air through the cooling fins. The
scoop is completely sealed and does not allow any air to flow over the
edges of the core. Air will always flow over the edges rather than
through the core, if given the opportunity.
- The intercooler is also mounted well in front of the radiator
so as not to cause any low speed cooling issues. This is a common
problem with many other systems.
- The new system also gives the engine compartment a much cleaner look.
- The kit adds the remainder of the charge tubing to complete the system.
- An aluminum Turbosmart blow off valve with mounting hardware and an exhaust filter is available for an additional fee.
- The 2005-2007 LS2 intercooler upgrade kit includes:
- A&A Corvette custom Ram Air Intercooler
- Intercooler mounting racket assembly
- Powder coated aluminum top shroud with mounting screws
- Two piece sheet metal enclosure kit
- Radiator support spacer kit
- Formed plastic air bridge
- Custom high flow air filter
- Polished aluminum mandrel bent intake duct
- Two 6" aluminum charge tubes
- 6" charge tube with mounting flange for the blowoff valve
- Turbosmart aluminum high flow blowoff valve (additional cost)
- Silicone coupler kit:
- (1) 3 1/2" dia x 4" long coupler
- (2) 3 1/2" dia x 3 1/2" long coupler
- (1) 1 1/2" dia x 6" long coupler
- (1) 3" 45 degree silicone hose
- (1) 3" 90 degree rubber hose
- (1) 3" 90 degree molded silicone hose
- (1) 3 1/2" to 4" silicone reducer
- (1) 2 3/4" to 3" silicone reducer
- Clamp kit:
- (2) #24 clamps
- (8) Constant tension clamps
- (8) #42 worm gear clamps
