DINAN Free Flow Stainless Exhaust w/ Polished Tips (BMW 550i G30)

The G30 M550i exhaust ushers in a new era of Dinan exhaust design. To date, Dinan has been synonymous with welded on, thin walled tips and a philosophy of exuding a civilized note when you want it to be, and a pleasantly aggressive one under hard acceleration. While the mantra is maintained, albeit tweaked with the emergence of mid-pipes and resonator deletes to those who want an even more aggressive sound, the styling of the tips is being drastically transformed. The new massive 4" diameter tips on the M550i exhaust are the biggest we have done thus far in addition to being double walled, the polar opposite of our normal thin walled style. Perhaps most importantly however is the new tips are clamp-on. Not welded as in the past, so they can be easily swapped to new styles, or replaced as the need arises.

Internally, the exhaust is typical of other Dinan exhausts and is designed to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. This is partly courtesy of the retained computer controlled exhaust valves that limit noise during low speed driving and open fully during high-load conditions to allow free flow. Like all Dinan exhausts, our M550i Free Flow Axle-Back Exhaust is engineered to reduce low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. In fact, on the G30 M550i equipped with a Dinan exhaust you will be astounded at how eerily quiet it is in the cabin. That is quickly changed however when exiting the vehicle and being witness to the sporty luxury sedan revving its stout V8 engine with the exhaust valves wide open. Blissfully bellowing a sweet deep tone that begs for more is the reward. When you succumb to those desires the throaty note at full load is even more rewarding letting all those around you know your M550i is seriously capable yet dignified at the same time.

A new era of Dinan exhausts is upon us and they are marked with larger than life replaceable tips.

Benefits of the Dinan G30 M550i Free Flow Axle-Back Exhaust with Polished Tips:

+ +8 HP @ 6600 RPM, +6 FT-LB @ 6600 RPM
+ Four massive 4" diameter clamp-on, double-walled, polished and laser engraved exhaust tips.
+ Easy bolt-on installation with included mounting hardware
+ Enjoyably louder, sportier sound
+ 100% 304 stainless steel construction
+ Computer controlled exhaust valves are retained and limit noise during low speed driving and open fully during high-load conditions.