BMR Lower Control Arms w/ Polyurethane Bushings, Extended Length (1991-1996 GM B-Body)

Factory control arms for the SS are the same as what Chevrolet puts on Grandmas Caprice. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. BMR control arms are built using 1-5/8" x .120" rollcage tubing with 1/4" thick mounting plates for a bulletproof combination. Lower arms are available stock length or 3/4" longer than stock to properly center the wheels in the wheelwells(See below illustration) and both are equipped with swaybar mounting holes and greaseable, low deflection polyurethane bushings. Upper control arms are available in either fixed or adjustable versions. Adjustable uppers allow "on-car" adjustability by simply loosening the jamnuts and turning the adjuster. Now you can adjust your pinion angle "on-car" without unbolting the control arm. These adjusters are by far the strongest in the industry. Made from 1-1/8" CNC milled steel then zinc plated for corrosion resistance, they truly are overkill! Available in Black Hammertone or red powdercoat.

NOTE: In some instances, mainly due to ride height variation, it may be necesarry to install a longer driveshaft when using extended length control arms.