The Mountain Goat Series™ front control arms geometry correction relocation brackets for the Jeep® JK Wrangler are a necessary upgrade on any Jeep® JK Wrangler that is lifted 3" or more.
These front control arms geometry correction relocation brackets eliminate the need for extended length and/or adjustable front control arms or cam bolts for caster correction on a 3"-4.5" lifted Jeep® JK Wrangler. They allow for the proper caster range to be achieved using stock length front control arms. They may also be used on short arm lifts of 5"-6" if combined with extended length and/or adjustable front control arms.
Besides caster correction, they offer many other advantages as well. They improve the front impact ride quality (expansion joints and ledges), increase anti-dive for improved braking performance and decrease the operating angle of the front driveshaft.
By reducing the angle of the front control arms, the suspension works in a more natural state. So when hitting a bump, the force applied to the control arms is directed up into the springs, instead of back into the frame.
Changing the instant center increases anti-dive for improved braking, the front of the Jeep® will barely drop under hard braking. This increases the force on the front tires, improving traction for better straight line braking. They reduce inertia under braking in curves, so handling is improved as well.
They decrease the operating angle of the front driveshaft and rotate the pinion up as the front axle drops, which eliminates torn boots on the CV on a lifted Jeep® JK Wrangler.
They're precision manufactured from CNC laser cut and formed high strength 1/4" steel for exact accuracy and an easy 100% bolt in installation. All required mounting hardware is included and they feature a brilliant and durable gloss black powder coated finish for excellent protection from corrosion, rocks and debris.
Priced per Pair -- Qty. 1 = 1 Pair
Mountain Goat Series™ Front Control Arms Geometry Correction Relocation Brackets Specifications & Features:- Eliminate the need for extended length and/or adjustable front control arms or cam bolts for caster correction with a 3"-4.5" lift.
- Can be used on short arm lifts of 5"-6" if combined with extended length and/or adjustable front control arms.
- Increase anti-dive for improved braking and handling.
- Decrease the operating angle of the front driveshaft.
- Manufactured from CNC laser cut and formed high strength 1/4" steel for maximum durability.
- All required mounting hardware is included.
- Powder coated gloss black for a brilliant and durable finish.
- Proudly hand crafted by skilled craftsman in PA - USA!
