MAHLE PowerPak Pistons [Bore 87.50mm | Stroke 83.1mm | Rod 155.9mm | Comp Height 32.78mm | Pin Diam. 22.5mm | Crown Vol -2cc | Wght G 347 | 43cc 10.0 | Alloy 4032] (2013-2016 Focus ST)

The MAHLE Motorsports PowerPak kit is our high volume shelf stock program developed for high performance enthusiasts and sportsman class racers. The PowerPak pistons are predominantly made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances and improved temperature stability. Some applications require 2618 alloy including the PowerPak Plus category. Each kit is complete with a set of high performance rings, containing either a low drag 1.0mm, 1.0mm, 2.0mm set, a 1.5mm, 1.5mm, 3.0mm set, or a 1/16", 1/16", 3/16" high performance Ring Pak standard with big block kits.

Power Pak feature includes:

• Forged piston for performance applications
• Fully-machined crown
• Grafal anti-Friction coating on skirts*
• Phosphate-coated to reduce micro-welding and pin galling**
• Pin bores finished on CNC boring equipment
• Hand deburred
• High strength, light weight German steel pins
• Race-proven round wire locks
• Low drag ring pack
• Light weight slipper skirt forgings

* MAHLE's GRAFAL skirt coating reduces drag, scuffing, friction and cylinder bore wear; reduces piston noise.

** Phosphate coating provides the grey appearance to the MAHLE piston. This dry lubricant coating (not to be confused with a thermal film coating) provides a lubricant film in the pin bores and ring grooves until the oiling system of the engine reaches operating pressure; particularly useful during the initial start-up or break-in of engines to protect against galling and microwelding. The piston crown is still machineable.

1.2, 1.2, 2.8mm Performance Ring Set Included
Hard Anodized Top Ring Groove For Extreme Duty Applications