INSTRUCTIONS
EMISSIONS
50 State Legal.
This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number:
D-660-227
DESCRIPTION
Introducing Accessflash for your Porsche 992 Turbo and Turbo S PDK!
When increasing engine power output (torque) in modern Porsches, it is necessary to make changes to the transmission calibration. The changes in our High Torque Calibration increase torque limitations while retaining Porsche's factory logic. This allows for the TCM to continue increasing clutch pressure as torque increases, preventing excessive slip. It also prevents the TCM from disengaging the clutches completely when torque is above it's factory-implemented limit.
Additionally, calibration changes were made to reduce shift time when drivers are manually changing gears using paddles.
Note: This is for a PDK Flash ONLY.
The PDK Module will need to be shipped to COBB Tuning to be unlocked, more on that process
HERE.
WHY?
As you add more power to your Porsche 992 Turbo or Turbo S the factory transmission calibration can become a limiting factor. Adding our High Torque PDK Tune into the mix for your 992 Turbo or Turbo S helps to remove any torque limitations the factory tune may otherwise impose.
FEATURES
- Increase TCM Torque Limits
- Decrease Shift Response Time w/ Manual Paddle Shifts
- Required for Power Beyond COBB Stage 1
- Retains Factory Porsche Logic
- Next Day Air Shipping Included for PDK Module Shipping
WARRANTY
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by COBB Tuning may void portions of your vehicle's factory warranty. Some items may not be legal for "on highway use". COBB Tuning makes no guarantees to the legality of any parts used for "on highway vehicles" and accepts no responsibility for compliance with the vehicle's factory warranty.
NON-COBB PRODUCT INFORMATION
Products sold by COBB Tuning but not manufactured by COBB Tuning are covered only by the warranty of the manufacturer. COBB Tuning can help coordinate returns, exchanges, or warranty claims of these products per the terms of that manufacturer's policies. COBB Tuning may accept returns of non-COBB Tuning branded products on a case-by-case basis. In these rare cases, a 20-80% restocking fee may apply, at the discretion of COBB Tuning.
COBB COMPONENT LIMITED WARRANTY
COBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning, or sold under the COBB brand, and purchased directly from COBB Tuning or from an Authorized COBB Tuning dealer hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship ("Limited Warranty"). This Limited Warranty extends only to the original retail purchaser of the component. This Limited Warranty is intended to cover components only when they are used in the manner for which they were originally designed. This Limited Warranty is void on all products found to have been used in racing or off-road applications, of any nature whatsoever, and on all products that show evidence of abuse, lack of proper maintenance, improper installation, misapplications, alteration in any way whatsoever from their original design or negligence in the use of COBB Tuning products. This Limited Warranty does not cover normal maintenance or wear items such as belts, brake pad material, clutch disc friction material, and brake rotors. COBB Tuning accepts no responsibility for any special, incidental, or consequential damages or costs or grievances incurred by failure of a COBB Tuning component, including but not limited to labor and shipping costs. All implied warranties shall be limited in duration to the said 12-month warranty period and shall be limited to the express terms and provisions of this Limited Warranty.
PROCEDURES FOR WARRANTY CLAIMS
In the event a problem occurs with a COBB component, please contact COBB Tuning at 866-922-3059 during our normal business hours. When speaking to a customer representative, you will need to have your invoice number on hand. The following steps will then be followed: 1. COBB representative will determine if product will have to be returned to COBB Tuning for inspection. A RMA number will be given to be placed clearly on the shipping label. 2. The retailer or the customer will ship the component in question back to COBB Tuning, including the original sales receipt and a clear description of the exact problem experienced. It is the responsibility of the retailer or the customer to pay for shipping back to COBB Tuning. 3. If COBB finds the component to be defective and within the warranty period, COBB will repair, replace, or issue credit to the customer at COBB's option. Any repaired or replaced product will be returned to the retailer or customer, freight prepaid via ground or by truck. Please note that no replacement warranty parts can be shipped until original parts are returned to COBB tuning for inspection.
