CAM MOTION TITAN I LS1 Hydraulic Roller Camshaft, 8660 [218-222 | .586-.576 | 112] (GM 5.7L LS1 & LS6)

Grind # Grind# XA218/345-XA222/340-12+3
Hydraulic Roller Camshaft
Mild Performance
Duration at .050": 218/222
112 Lobe Center Angle with a 109 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .586"/.578"
Recommended Displacement: 5.7-6.0 Liter Engines
Cylinder Heads: Cathedral Port
Recommended Compression Ratio: 9.0-10.75:1
Recommended Headers: Stock Manifolds - 1 3/4"
Recommended Stall Converter: Stock-2800
Recommended Rear Axle Ratio: Stock
*Designed for factory style, or high flow aftermarket long runner intake manifolds.

The TITAN I LS1 camshaft is designed for mild performance in cars using 4.8-6.2 liter LS engines equipped with cathedral port, LS1 style heads. The TITAN I LS1 will have a slight performance idle and improved power throughout the RPM range with emphasis on mid-range power and torque. This camshaft can be used in a completely stock vehicle with just a valve spring and pushrod upgrade. Additional performance gains can be appreciated when used with headers, an increased stall speed torque converter, free flowing exhaust and intake systems.

The TITAN series cams are designed with our renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability.

Recommended Accessories:
Cam Motion .600: Lift Beehive Valve Springs or our .660" lift Dual Valve Spring Kit
Cam Motion 5/16" .080" Wall Hardened Chromoly Pushrods