DETAILS:
- +35 HP / +31 lbs. x ft. Torque max gains
- Outflows factory intake by 31%
- High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
- CAD-Designed Roto-Molded Intake Tube
- Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
- Pro DRY S Oil-Free washable/reusable Filter For Maximum Convenience
- Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
- No Cutting or Drilling on OEM Parts for Faster Installation
Unique One-Piece High Quality Housing W/ Sight Window:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene.
High Quality Tube:
This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality injection molded air temp sensor fitting provided for easy installation.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt, CARB EO# D-550-58.
![GSC POWER-DIVISION Beehive Spring Set w/ Titanium Retainers [Coil Bind (in) 0.800 | Install Height (in) 1.350/1.361 | Seat Pressure (lbs) 75/72 | Open Pressure, 11.00mm lift 217lbs@0.917"/214lbs@0.928" | Maximum Valve Lift (in) 0.480] (MITSUBISHI Lancer EVO X)](images/GSC_POWER-DIVISION/GSC5042.jpg "GSC POWER-DIVISION Beehive Spring Set w/ Titanium Retainers [Coil Bind (in) 0.800 | Install Height (in) 1.350/1.361 | Seat Pressure (lbs) 75/72 | Open Pressure, 11.00mm lift 217lbs@0.917\"/214lbs@0.928\" | Maximum Valve Lift (in) 0.480] (MITSUBISHI Lancer EVO X)")
