DETAILS
Improve your vehicle's throttle response and overall drivability with this Sprint Booster Power Converter.
Simple, Plug-and-Play Installation
Ultra Compact Device Mounts in the Cabin
3 Acceleration Modes w/ 18 Acceleration Programs
Valet and Pedal Lock Mode Provide Protection Against Unauthorized Vehicle Use
For Automatic Transmissions
Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver's disposal.
Simple Plug-and-Play Installation:
For vehicles with electronic control (ETC) systems, or drive by wire, this device plugs into the OE connector located behind the accelerator pedal. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. It does not affect other systems such as electronic injection, ABS, etc.
Three Acceleration Modes:
The three main acceleration modes can be switched by pressing the main button. When the LED is off, the Sprint Booster is deactivated, and the car has factory settings. In Sport Mode, the LED is green, and throttle response is improved by up to 30%. With the red colored LED, the Sprint Booster is in Race Mode, and it improves response by up to 60%.
18 Acceleration Programs:
Each acceleration mode comes with nine programs. Select 1-9 in SPORT mode and 1-9 in RACE mode, with '1' being the least aggressive program and '9' the most aggressive. The acceleration programs can be changed using the two arrow buttons on the top of the device. By selecting the desired acceleration program in each mode, the driver can fine-tune each mode per their driving style (e.g. select SPORT 9 & RACE 5).
Valet and Pedal Lock Modes:
Valet mode limits the acceleration of the vehicle by 55%, 65%, or 75% (comes in three selectable levels). It is activated and deactivated with a three-digit PIN. By limiting the acceleration, there will be a significant reduction in the vehicle's performance. The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle through a 3 digit PIN. The menu for Valet and Pedal Lock mode is accessed when the vehicle is stationary and the Sprint Booster is off, by pressing the two arrow buttons simultaneously.
Better Drivability:
In addition to increased throttle response for effortless downshifts and safer overtaking, there is also a noticeable improvement to the transmission’s shifts (on vehicle’s equipped with automatic transmissions).
EMISSIONS DISCLAIMER
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
VEHICLE APPLICATIONS
2017-2024 Nissan Titan Gas V8-5.6L
2016-2019 Nissan Titan XD Diesel V8-5.0L (td) Cummins
2017-2024 Nissan Titan XD Gas V8-5.6L
Instructions
WARRANTY POLICY
LIMITED WARRANTY STATEMENT
aFe POWER Limited Warranty applies solely to products purchased from aFe POWER (online or by phone) or from an authorized aFe POWER retailer to be free from manufacturer's defects due to workmanship and materials. The warranty period begins from the confirmed shipment arrival date and covers the applicable period in the warranty table. All warranty is limited to the repair or replacement of the aFe POWER product. Any warranty period will not be extended if we repair or replace the product.
- This warranty applies only to the original purchaser of the product and is non-transferable.
- Proof of Purchase is required for all warranty claims.
- Limited Lifetime Warranty products last for the lifetime of the product against manufacturer defects, not normal wear and tear. It is limited to the lifetime of the part and not of the vehicle.
- Warranty is valid given that all aFe POWER instructions for installation, service, and/or cleaning were properly followed.
- Proper maintenance with regular product inspections is required to ensure warranty coverage.
- Any part replaced under warranty will carry the remainder of the original warranty or 90 days, whichever is longer.
NOT COVERED UNDER AFE POWER LIMITED WARRANTY
- Any product not purchased directly from aFe POWER (online or by phone) or an aFe POWER authorized dealer and does not carry an original, valid Proof of Purchase
- For parts used on "race" vehicles
- Any product that is not within the Limited Warranty period or presented by the original purchaser
- Any costs or damages due to improper installation, abuse, improper maintenance, unauthorized repair, or alteration
- Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe POWER product
- Any products sold under aFe POWER's Private Label Program
- All items labeled Closeout, Overstock, or Extra Savings are final sales and not covered under warranty.
WARRANTY CLAIM PROCESS
aFe POWER reserves the right to inspect any product to determine the warranty coverage. If a product is found to be defective, it will become the property of aFe POWER and be replaced. If a product is determined to be not covered under the Limited Warranty, it will be returned to you. All aFe POWER warranty decisions are final.
- To initiate a warranty claim, please submit your request with your original Order Number and Proof of Purchase to Tech Support.
- You will receive a Warranty Claim Number and an RGA (Returns Good Authorization) number to return the product. Be sure to retain both to track your claim.
- We will not send any replacement parts before receiving the warranty return.
- Allow 5 to 6 weeks for the warranty process. Replacement products are subject to availability.
DISCLAIMER
No other warranty expressed or implied applies, nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
PRICING / TYPOGRAPHICAL ERRORS
aFe POWER continuously provides real-time, accurate information and updates to our website and storefront. Due to the immediate nature of these updates, correcting any errors and/or omissions can happen anytime without prior notice. aFe POWER is not responsible for any additional charges, labor, loss, or damage incurred because of information, correct or incorrect, referenced, or products purchased by aFe POWER. aFe POWER and aFePower.com reserve the right to cancel undelivered orders based on inaccurate information.
Effective as of Feb 21, 2024
