Toggle right Slidebar




DISCOUNTS FOR ALL ACTIVE AND VETERAN EDUCATORS FIREFIGHTERS LAW ENFORCEMENT MEDICAL MILITARY CALL CHAT EMAIL TEXT FOR MORE DETAILS MAY EXCLUDE CERTTAIN ITEMS AND SOME RESTRICTIONS APPLY

AEM EV CD-7L CARBON LOGGING DISPLAY

$1,999.95

REVIEWS: 0
AVERAGE RATING OF 0 0 of 5 Stars!

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

FEATURES
  • Full color 7" screen with 800x480 resolution
  • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
  • Layout files interchangeable with all versions of the CD-5 Carbon
  • Wiring interface/harness is identical to the CD-5 Carbon
  • Rugged, lightweight flow-molded carbon fiber composite enclosure
  • Total display weight of 20.9 oz. / 595 grams
  • IP65 water resistance - open cockpit, marine and motorcycle safe
  • Accepts channels from two separate user programmable CAN bus connections - works with AEMnet enabled devices and non-AEM 3rd party devices side by side
  • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
  • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
  • Install the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
  • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
  • Available with or without on-board 20Hz GPS receiver and antenna
  • Add a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
  • Add an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately)
  • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
  • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
  • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
  • Use included page layouts and input your channels and text, or create your own from scratch
  • Free DashDesign Graphics Editor software
  • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
  • Two programmable LEDs
  • Odometer function
  • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
  • 'Headlight-in' connection dims the dash and LEDs during night operation
  • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
  • User supplied graphics can be changed based on channel values (up to the full screen size)
  • Convert CAN bus channel values to user-defined text in multiple languages
SPECS
Brand AEM
Built-in Buttons Yes
CAN Ready Yes
Category Gauges and Gauge Accessories
Datalogging Yes
Emission Code 5
Enclosure Material Carbon Fiber
External Buttons Required No
GPS No
GPS Included No
Internal Memory All 4L
IP Rating IP65
Logging Yes
Logging Speed 1,000Hz/channel
Product Type Dash
Screen Size 7 Inch Diagonal
Sub Category Instrument Panel
Touchscreen No
Warranty Manufacturer's 1 Year Warranty
Wiring Harness Included Yes
UPC 840879026035
Part Number 30-5701
EMISSIONS
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

TECH RESOURCES
AEM Data

Dash Design Software

Instructions - techlibrary_aem-cd-dash-full-manual.pdf

Instructions - techlibrary_aem_cd_dash_quick_start_guide.pdf

AEM Performance Electronics Limited Warranty

AEM Performance Electronics ("AEM Electronics") warrants to the original consumer that all AEM Electronics Products will be free from defects in material and workmanship under normal and proper use for a period of 90 days from the date of the original purchase.

For purposes of illustration, but not limitation, the following are not defects in material or workmanship: (a) normal wear and tear and/or required maintenance; (b) improper handling, storage, installation, lubrication or maintenance; (c) damage resulting from or related to misuse (including use in a way other than those applications recommended by AEM), abuse, unauthorized modification or alteration, incorrect polarity (+&- wires crossed), accident, acts of God, or external causes; and (d) cosmetic damage (nicks, bruising, discoloration).

EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND THE ONLY WARRANTY APPLICABLE TO THE PRODUCT. IT IS OFFERED EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE DISCLAIMED.

Limited Remedies: If a Product fails because of a defect in material and/or workmanship within this limited warranty period, AEM will repair or replace the Product at no cost to the customer. This warranty is limited to the repair or replacement of the AEM Electronics Product. In the event of a defect, to the extent permitted by law, these are the customer's sole and exclusive remedies.

Incidental and Consequential Damage Disclaimer: EXCEPT WHERE PROHIBITED BY LAW, AEM ELECTRONICS DISCLAIMS AND UNDER NO CIRCUMSTANCES SHALL BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR LOSSES RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT AS WELL AS ANY BREACHES OF THIS WARRANTY OR ANY IMPLIED WARRANTY REGARDLESS OF THE CAUSE AND EVEN IF THE CLAIMED DAMAGES OR LOSSES WERE CAUSED BY A WARRANTABLE DEFECT.

This warranty applies only to the original purchaser of the Product and is non-transferable, except as prohibited by applicable law.

In no event shall this warranty exceed the original purchase price of the AEM Electronics Product.

Warranty returns will only be accepted by AEM Electronics when accompanied by a valid Return Merchandise Authorization (RMA) number and a dated proof of purchase.

Please note that before AEM Electronics can issue an RMA for any Product, it is first necessary for the installer or end-user to contact our technical support team to discuss the problem. Most issues can be resolved over the phone. Under no circumstances should a Product be returned, or an RMA requested before our support team is contacted. This will ensure that if an RMA is needed that our team is able to track your Product through the warranty process.

PRODUCTS OUTSIDE OF WARRANTY PERIOD
Most AEM Electronics Products, excluding discontinued products, can be replaced (at a discounted rate) following documentation of the faulted item being field destroyed. A valid Return Merchandise Authorization (RMA) number must be issued by the Support Team before a transaction for Product replacement can occur.


Add to Cart:

  • Model: 30-5701
  • FROM: AEM EV

ask a question
price match

we added this on Saturday 06 September, 2025.

RECENTLY VIEWED


© 2003-2025 COLORADOSPEED. powered by HP & TQ ... and some BOOST