American made with quality far superior to any other performance
aftermarket company, we build our water pumps with pride right here in
the USA. Don't be mislead by inflated flow numbers and competitors'
outlandish claims. We say what we mean and mean what we say. Our 2
year, unlimited mileage guarantee and full satisfaction money back
guarantee should convince you that buying Meziere is buying value!
This water pump model features:
- Fits GM LS-1 through LS-8 engines
- Suitable for street or drag strip use – 3000+ hour life expectancy
- Show quality chrome finish
- Heavy duty motor provides 42 gallons per minute free flow rating
- All stainless steel hardware included
- Light weight. Complete standard GM LS-X unit weighs only 7.1 pounds!
- Stainless steel large diameter main shaft with high performance ceramic seal
- Pump will clear cam belt drives and most blower drives
- 1" NPT inlet adapters are available for #12AN, #16AN, #20AN, 1¼", 1½" or 1¾" slip hose
- 1" NPT to 1 1/4" hose outlet adapter included
Technical Specifications:
- Belt Drives: Standard LS-X design will clear Jessel belt drives and comparable belt drive systems.
- Distributer Belt Drives: Spacers will be necessary to clear belt drive distributor systems.
- Finishing The System: This pump is supplied complete with
gaskets and hardware but without the inlet fitting. The fitting needs to
be ordered according to the size of the lower radiator hose.
- Amperage draw: Under normal use the pump will draw 6-7 amps.
- Overall Height Dimension: The heavy duty pump is 7.30" long from the mounting surface to the tip of the pump.
- Pump Weight: This application weighs 7.1 lbs.
- 16 volt systems: When purchasing a pump for a 16 volt system we
recommend the 16 volt optional motor on our pump. The 12 volt pump will
work for limited use applications.
Additional Notes:The
standard 42 GPM pump is suitable for normally aspirated engines up to
650HP. Supercharged, turbocharged and high compression, high horsepower
applications should use the 55GPM High Flow pump only. This model does
not accept heater or bypass hoses as a standard. These may be added at
the factory for an additional cost. Please call for details
