BMR Sway Bars w/ Polyurethane Bushings, 35mm Front & 25mm Rear, Hollow (1993-2002 Camaro & Firebird)

BMR swaybars are one of the most noticeable handling improvements you can do for your F-body platform. From the factory, GM did a decent job with spring rates and swaybars but the Camaro begs for more roll resistance. BMR recognizes this need and has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality.

BMR takes advantage of today's technology by manufacturing it's swaybars from tubular steel, a process started in Europe and adopted by most current auto manufacturers today.

All BMR swaybars are cold formed, a chosen manufacturing process that doesn't involve heat, resulting in more consistent "memory" retention.

Countless hours were put into developing and testing the ideal rates for our bars, resulting in a massive 1-3/8" hollow front bar combined with a 1" diameter hollow rear bar. This combination provides a very neutrally handling platform that remains stable during aggressive driving maneuvers without sacrificing ride quality.

NOTE: Convertible models MAY need to trim or remove the additional front support brace above the steering rack.

- Hollow front and rear construction provides lighter weight than solid designs
- Polyurethane bushings and end links included
- Cold formed (instead of hot formed) to provide better torsional fatigue resistance