STILLEN TRUCONTROL [70+ HP | 86+ FT/TQ] (2016-2024 Infiniti Q50 & Q60)

Upgrade your 2016-2024 Infiniti Q50 and the 2016-2024 Infiniti Q60 with the TruControl by STILLEN Inline Power Module! STILLEN is excited to introduce this high-performance addition, specially designed to elevate your Infiniti Q with the V6 VR30DDTT engine effortlessly. By seamlessly integrating the Power Module into the factory wiring harness and fine-tuning crucial parameters, we unlock increased boost pressure, delivering substantial power and torque gains across the entire power band. And the best part? You'll be up and running in just 15 minutes with no need for any special tools, splicing, or soldering. But that's not all - we also offer custom tuning files for Stillen performance products. With our expert tuning options, you can optimize your Infiniti Q50/Q60's performance to suit your unique driving preferences and unleash its full potential on the road. Here's even better news - the TruControl by STILLEN Inline Power Module won't void your factory warranty! As long as you remove the product before visiting the dealership for service, your warranty remains intact. So, you can enjoy the benefits of enhanced power and performance without any worries. The TruControl by STILLEN Inline Power Module is your ticket to the easiest and most affordable horsepower upgrade available for your Infiniti Q50/Q60. Experience the difference and take your driving to the next level today!

Features and Benefits:

• +70 flywheel Horsepower gain*
• +86 ft. lbs. Torque gain at the wheels*
• Fits Luxe, Sport, and Red Sport models
• Very easy installation; Does not alter the factory ECU
• Bluetooth integration
• Free app with smartphone integration
• No wiring or specialty tools required
• Easy removal and reversible to maintain factory warranty
• Over-the-air Custom Tuning file for Stillen aftermarket parts (exhaust, intake, etc)

*Results may vary

Not for sale in California


The Numbers
From the factory the Q50/Q60 3.0t is rated at 400 flywheel horsepower. On our dyno we saw a maximum wheel horsepower output of 336 horsepower at 6300 RPM*. This is about a 15% drivetrain loss. Great work by Infiniti to get all of that power to the ground. After installing our TruControl by STILLEN Inline Power Module the dyno reported back a Max horsepower output of 392 wheel horsepower at 5390 RPM*. Simply by installing the TruControl by STILLEN Inline Power Module on the Q, we were able to gain more than 70 flywheel horsepower*.

Even more amazing than the gains in horsepower are the gains in torque output. As you can see in the dyno the factory torque curve begins to decline at just over 3500 RPM*. At this RPM the stock car produced 338 ft. lbs of torque. The TruControl by STILLEN Inline Power Module is at 393 ft. lbs of torque*. Whereas the factory torque curve begins to decline, the TruControl by STILLEN Inline Power Module curve only increases further until reaching its maximum output at 4720 RPM*. At this point the factory output has declined to 323 ft. lbs.* while the TruControl by STILLEN Inline Power Module has managed to increase to 409 ft. lbs of torque*. Truly amazing gains that make the Q50/Q60 an absolutely incredible car to drive.

*Results may vary

Easy to Use
With the engine on or with the key on, you can go through and [-/+] select which calibration you want to run at any point in time. You can use the Tuning: Pro App which also controls and resets all calibrations based on what you input in the application.

The TruControl by STILLEN Inline Power Module comes preloaded with up to 7 different maps for your Infiniti Q50/Q60. These maps are going to range anywhere from Race mode to Sport mode to Eco mode.

WARRANTY INFORMATION
TruControl Power Modules are covered under a 5 year manufacturer warranty. This warranty is for the product only and does not extend to the powertrain of the vehicle.

1. The Warranter shall warrant that as of the date of acquisition of the respective product shown on the invoice, the product components specified in section III. will show no defects within the periods specified hereinafter that might interfere with the respective product's function ("Warranty Case").

2. The product warranty shall apply only insofar as the Warrantee uses the vehicle, in which the respective product has been installed, for private - i.e. non-commercial - purposes only (commercial use means, for example, commercial passenger transportation, driving school vehicle; courier/delivery vehicle; rental car), unless such commercial use of the vehicle has not caused the defect in the product component that is under warranty.

3. In a Warranty Case, the product warranty shall, at the Warranter's option, cover either the free-of-charge supply of an equivalent replacement product or the free-of-charge repair of the product affected (if and insofar as technically feasible). In addition to that, the Warranter shall also organize, and pay for, the transportation of the replacement product, or of the product repaired, to the Warrantee. The Warranter's liability under this warranty shall be limited to the prompt correction or replacement of any defective part of the product which RaceChip determines to be necessary.

4. The indicated performance gains and fuel efficiency gains are target values. Deviations upwards and downwards are possible. These may, for example, be caused by standard factory model variations, the quality of the fuel used, the maintenance and ageing condition of the vehicle or the driving habits. If the indicated performance or fuel efficiency gains are not met, the purchaser must notify RaceChip within thirty (30) days from the day he or she received the product to get a refund.

The Warranter is not liable for any and all consequential damages arising from the breach of any implied or written warranty in regard to the sale of this product. This product warranty shall not, in particular, give rise to claims for damages or reimbursement of wasted expenditures.

Exclusion of product warranty:

1. Claims under this product warranty require that the defect to the respective product has not been caused by one of the following circumstances:

• normal wear;
• incorrect or improper installation (e.g. if the product or cable harness is laid in areas under great thermal stress, such as at the manifold or along the motor block, resulting in damage caused by melting) and/or product startup contrary to the Warranter's specifications;
• improper use or operation of the product contrary to the Warranter's specifications (e.g. rotary switch settings that have not been approved by the Warranter); changes performed to the product or unauthorized repair attempts without the Warranter's prior approval;
• off-road use in water under maximum use of the vehicle's fording depth; external damage, in particular accident in road traffic (i.e. a sudden event in road traffic re-sulting in a typical risk of damage caused in traffic), or damage caused by car wash, animals, etc.;
• force majeure or exceptional/extreme natural events, such as floods, natural disasters, etc.
• own fault on the part of Warrantee or third parties.

2. Warranty claims shall be excluded also if the Warrantee should culpably violate the regulations on how to proceed in a Warranty Case, as specified in section VI of the present terms of warranty, unless such violation is causal neither to the ascertainment of the Warranty Case nor to the ascertainment or extent of the Warranter's liability.

3. Warranty claims shall be also excluded if the product is installed in a vehicle model or engine type for which it has not been expressly approved by the Warranter.

This warranty is void if the device is opened or otherwise tampered with