User Defined Parameters
If you do not already have User Defined Parameters, the feature can be acquired by logging into your customer page, going to the "My Devices" tab, and purchasing the one-time feature unlock for $169.99 next to your device. After you purchase, go into
VCM Editor and re-sync your interface to apply the change.
What are they?
If you have information on parameters (
Switches,
Scalars, and/or
Tables) that we do not have defined, you can add them into the VCM Editor software for editing by using User Define Parameters.
How are they used?
To use this feature, you will first define the parameters using TunerPro, then you will save the TunerPro definition, and finally you will import the TunerPro definition right into the User Defined Parameters feature in VCM Editor.
How to define a parameter:
If you have the necessary information you can define and import your own parameters by doing the following:
- Define the Parameter(s) using TunerPro (To download TunerPro, visit: Download TunerPro)
- Save your .XDF file with the parameters you wish to import
- Open your .HPT file in VCM Editor
- Go to Edit -> User Defined Parameters
- Open the XDF File and your parameters will be imported into VCM Editor for editing.
Note: If you try to define a parameter outside of the Allowed Addresses range, they will not import, and you will not be allowed to edit them.
HP TUNERS' COMPLIANCE STATEMENT
HP Tuners designs and manufactures software and hardware tools for vehicle diagnostics, scanning, logging, calibration, and data acquisition purposes. The authorized use of such tools is to bring a motor vehicle into emissions compliance and/or to maintain emissions compliance, as well as for use on competition/racing and other exempted vehicles. HP Tuners does not create or provide tunes or pre-made calibrations.
HP Tuners' Terms of Use, policies, and agreements mandate that users shall comply with all local, state, and federal laws. In using HP Tuners software and hardware tools, you are representing, warranting, and agreeing not to use, employ or allow any HP Tuners tools to operate as a defeat device or to violate emissions compliance in any manner whatsoever. You further represent warrant and agree that the HP Tuners tools shall only be used by manufacturers, calibration businesses, and professionals to develop emissions-compliant and/or exempted calibrations.
Limited Product Warranties
Interfaces and Hardware Components
Duration: One (1) year from the date of purchase
Coverage: This limited one (1) year warranty only covers product defects caused by HP Tuners and is only redeemable within the original country or region of purchase by the original purchaser. This limited warranty does not extend to software or other digital products. To make a warranty claim, please provide your Proof of Purchase (original invoice and order number), device serial number (if applicable), Debug and Info logs, license file and photo evidence of defects to HP Tuners Support.
The Limited Warranty does not cover:
- Damage to product resulting from accidents, neglect, or misuse; exposure to liquid, moisture, or dirt; abnormal conditions (temperature extremes) or improper storage.
- Scratches or other cosmetic damage.
- Damage to connection points due to excessive force or improper use.
- Devices that have had the serial number removed, defaced, damaged, or altered in any way.
- Ordinary wear and tear.
- Products that have been modified, tampered with, or serviced by an unauthorized party.
Vehicle Control Modules
(PCM/ECM/TCM- New and Modification Service)
Evaluated on a case-by-case basis.
Vehicle Control Modules, whether new or modified by HP Tuners, carry no warranties, expressed or implied, and are offered "as is". In the event of a problem with a Vehicle Control Module product or service, please submit a ticket to HP Tuners
Support for resolution.
