Toggle right Slidebar




DISCOUNTS FOR ALL ACTIVE AND VETERAN EDUCATORS FIREFIGHTERS LAW ENFORCEMENT MEDICAL MILITARY CALL CHAT EMAIL TEXT FOR MORE DETAILS MAY EXCLUDE CERTTAIN ITEMS AND SOME RESTRICTIONS APPLY

Edelbrock E-FORCE Supercharger Stage 2 Track System [TVS Series 2650 | HP 686RW+ | Torque (Ft-lbs.) 533RW+ | No Tune] (2018-2021 Mustang GT)

$11,199.87

REVIEWS: 0
AVERAGE RATING OF 0 0 of 5 Stars!

BOOST THE PERFORMANCE ON YOUR STOCK MUSTANG
These Edelbrock E-Force Supercharger systems will boost the performance of your Mustang to impressive levels without changing the daily driving characteristics. These systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual intake runners for maximum low end torque for great off throttle performance. E-Force superchargers provide the most power at the lowest amount of boost, resulting in performance that is safe to operate on a completely stock engine.

Edelbrock E-Force Supercharger systems deliver excellent horsepower and torque in a complete kit. Featuring a unique design with minimal components. It makes it possible to fit an E-Force Supercharger under the stock hood. The core of each system is the Eaton Gen VI TVS rotating assembly with a four lobe design with 160° of twist for maximum flow, minimum temperature rise, quiet operation and excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. Edelbrock supercharger systems are available in three performance levels for most applications.

STAGE 1 - STREET SYSTEMS
These systems are emissions legal and provide the best combination for your daily driver. They will also include a tune for both 91 and 93 octane, on select applications.

STAGE 2 - TRACK SYSTEMS
These systems include the components from the Stage 1 system with the addition of a cold air intake (if required), smaller pulley, fuel injectors (if required), fuel pump (if required) and a custom tune, giving you great performance for the track. These systems are for competition racing only (except for our Chevrolet Corvette and 2015-16 Ford Mustang systems, which are emissions legal) and are available as a complete kit or as an upgrade.

STAGE 3 - PROFESSIONAL TUNER SYSTEMS
Our Professional Tuner systems include all of the essential components that a racer would need to build a custom supercharged racing setup. They offer flexibility in pulley selection, cold air intake and more. These systems are for competition racing use only.

Finally ... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and aluminum coil covers (on most applications) are powder coated for durability and provide a unique appearance that will give any engine compartment a custom look.

E-FORCE FEATURES & BENEFITS
  • Everything fits right out of the box, no welding, cutting or grinding
  • Eaton TVS Rotor assembly
  • Self contained oil system (no drilling or plumbing required)
  • Electronic PCM programming module, with Stage 1 & Stage 2 with application specific tuning
  • High Flow Mass Air Flow Sensor (as needed)
  • Little to no decrease in fuel economy
  • Limited powertrain warranty
  • Unique design allows maximum low end torque and instant throttle response
  • 50-state emissions street legal (Stage 1 and select Stage 2 systems)
Important Installation Notes: 2005-06 installations require the use of Cooling Upgrade Kit #15804 (sold separately). 2009 installations will require Hardware Kit #15805 (sold separately). Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program, which can be downloaded www.edelbrock.com. For safety, the Edelbrock supplied program will retain the factory vehicle speed limiter setting. Kit #15880 will fit BOSS Mustangs and will require custom tuning. #1580 will clear factory strut tower brace on Bullet models.

Available Warranty: All E-Force Stage 1 systems supplied with a tuner, are eligible for our FREE 3 year/36,000 mile Limited Powertrain warranty.

complete


Add to Cart:

  • Model: 153880
  • FROM: Edelbrock

ask a question
price match

we added this on Tuesday 08 September, 2020.

copyright © 2003-2024 COLORADOSPEED. powered by hORSEPOWER & tORQUE