MANLEY NHRA Legal Super Stock I-Beam Steel Connecting Rods [Length Stock LS | Journal Size Honda/IRL | Center-to-Center 6.100" | Big End Bore 2.008"/2.015" | Pin Bore .8671" to .9281" | Avg. Gram Weight 585] (GM LS)

Manufactured from 4340 aircraft quality vacuum degassed material
Fully machined to produce the lightest and strongest rod possible
Shot peened after machining to MIL spec and 100% individually magnafluxed
Cap fasteners are 3/8" ARP 2000 cap screws (14359 has 7/16" ARP 2000)
Flywheel horsepower range for these rods is 700+ HP

Horsepower range could be exceeded depending upon rpm, stroke, piston weight and power adders

P/N 14359-8 is for Small Block Chevy LS engines with pistons ready to accept 6.125" length rods. Stock LS rods are 6.100" long. Note the pin bore is .9281". Stock LS pins are .945" diameter. The 14359-8 has no offset on the crank journal, same as the stock LS connecting rods.

P/N's 14340,14438 and 14443 REQUIRE use of one of the connecting rod bearings listed below. To order rods finished to the exact size for Federal Mogul bearings, affix an "F" after the rod part number. For rods finished to exact size for Clevite bearings, affix a "C" after the rod part number. In addition, you MUST specify which Clevite bearing will be used.

You must specify the exact final size pin bore desired