CAM MOTION TITAN I LS3 Hydraulic Roller Camshaft, 5150 [217-225 | .595-.587 | 114] (GM 6.2L LS3)

Grind # XA217/350-XA225/345-14+2
Hydraulic Roller Camshaft
Mild Performance
Duration at .050": 217/225
114 Lobe Center Angle with a 112 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .595"/.587"
Recommended Displacement: 6.0-6.2 Liter Engines
Cylinder Heads: Rectangle Port
Recommended Compression Ratio: 9.0-11.0:1
Recommended Headers: Stock Manifolds - 1 3/4"
Recommended Stall Converter: Stock-3000
Recommended Rear Axle Ratio: Stock
*Designed for factory style, or high flow aftermarket long runner intake manifolds.

The TITAN I LS3 camshaft is designed for mild performance in cars using 6.0-6.2 liter LS engines equipped with rectangular port, LS3/L99/L92 style heads. The TITAN I LS3 will have a slight performance idle and improved power throughout the RPM range with emphasis on midrange power and torque. This camshaft can be used in a completely stock vehicle with just a valve spring and pushrod upgrade. Additional performance gains can be appreciated when used with headers, an increased stall speed torque converter, free flowing exhaust and intake systems.

The TITAN series cams are designed with our renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability. Cam Motion offers this cam in 5150, 8660 and our top of the line 8620 camshaft cores.

Recommended Accessories:
Cam Motion .600: Lift Beehive Valve Springs or our .660" lift Dual Valve Spring Kit
Cam Motion 5/16" .080" Wall Hardened Chromoly Pushrods